Buy Fevicol Marine Adhesive – 5kg, 10kg, 20kg, 50kg Packs available.
Fevicol Marine is a premium quality synthetic resin based adhesive suitable for wood work. It is technologically superior product in its class, providing very high water resistance and excellent bonding even on marine – grade plywood after optimum curing. Because of its very high resin content and special formulation, it offers much better durability to furniture being used in high humidity areas.
Fevicol Marine is a waterproof, durable adhesive designed for marine and boatbuilding applications. It bonds strongly and can withstand harsh marine conditions. Suitable for use on wood, metal, fiberglass and more. Easy to apply, making it ideal for DIY enthusiasts and professionals alike. The ultimate solution for all seaworthy bonding needs.
APPLICATION METHOD of Fevicol Marine Adhesive-
- Surfaces to be bonded should be free from oil; grease; dust and dirt and should be dry and properly leveled.
- For best results, roughen the surfaces to be bonded.
- Stir content of container before use.
- Apply even coats of Fevicol Marine first on comparatively non-porous surface, and then on porous surface for e.g. apply first on laminate and then on plywood.
- If possible, application should be such that, it should be lengthwise on one surface and breadth-wise on other surface. This will help in proper and uniform spreading of adhesive while pressing.
- Before allowing adhesive to dry, and bring both the surfaces in contact together, make proper alignment, and start pressing from one side by using wet squeezed cloth to avoid bubbles, and ensuring uniform contact.
- Please note that Fevicol Marine starts to dry quickly. Position the substrates within 5 – 6 minutes. Repositioning should be done if required within a minute of joining.
- Pressure can be given by using nails; clamps; weight; masking tape etc.
- Excess adhesive; which oozes out from edges should be wiped off with wet squeezed cloth.
- To get best results, bonded surfaces are to be kept under pressure for 24 hrs.
- If required, pressure can be released after 4-6 hrs and the bonded assembly can be put to use.
- In case of highly porous surfaces like particleboard and MDF, it is advised that, a thin coat of Fevicol Marine is applied by pressure on the surface and allowed to dry. This will fill the pores of the surface. After drying, light sanding is to be done for getting smooth leveled surface and then this surface is bonded as per the method shown above.
ADVANTAGES
- Solvent free, Non-hazardous, Non-flammable, No fire hazards.
- Free from offensive smell.
- If required it can be diluted with clean water till applicability is achieved.
- Very quick setting time. Handling strength is achieved within 4 – 6 hrs of application.
- Superior flow and spreadability and hence it can give higher coverage.
- Excellent bond strength offering better moisture resistance.
- Heat resistance in normal case
- Can be applied by brush, roller, spreader or any suitable applicator.
- Easy to clean up while wet.
- Excellent film formation.
- Dries clear
Areas Of Application-
- Plywood to Laminate
- Plywood to Veneer
- Any Wood to Wood bonding
- MDF/Particle board/Block board to laminate
At GHARABANAO.COM you can get your Interior related materials at Angul, Balangir, Balasore, Bargarh, Bhadrak, Boudh, Cuttack, Deogarh, Dhenkanal, Gajapati, Ganjam, Jagatsinghapur, Jajpur, Jharsuguda, Kalahandi, Kandhamal, Kendrapara, Keonjhar, Bhubaneswar, Koraput, Malkangiri, Mayurbhanj, Nabarangpur, Nayagarh, Nuapada, Puri, Rayagada, Rourkela, Sambalpur, Sonepur, Sundargarh. Best price Guaranteed
