Buy Fevicol SpeedX Adhesive – 5kg, 10kg, 20kg, 50kg Packs available.
FEVICOL SPEEDX is a premium Poly vinyl acetate based adhesive suitable for wood work. It is technologically superior product in its class, providing high water resistance and very quick bonding. Because of its very high resin content and specially advanced formulation, it not only offers much better durability to furniture being used in high humidity areas, but also enables substantial saving due to shortened process time. It is non – flammable and non-toxic in nature.
One of the standout features of Fevicol Speedx is its water resistance, making it suitable for both indoor and outdoor use. It can be used on a variety of materials, including wood, metal, ceramic, leather, and many others, making it a versatile solution for a wide range of projects.
In conclusion, Fevicol Speedx is a strong, fast-drying adhesive that is suitable for a wide range of applications and materials. Its water resistance and quick drying time make it an excellent choice for those looking for a versatile and efficient solution for their bonding needs.
APPLICATION METHOD of Fevicol SpeedX Adhesive
- Surfaces to be bonded should be free from oil; grease; dust and dirt and should be dry and properly leveled.
- For best results roughen the surfaces to be bonded.
- Stir content of container before use.
- Apply even coats of FEVICOL SPEEDX first on comparatively non-porous surface, and then on porous surface for e.g. apply first on laminate and then on ply wood.
- If possible, application should be such that, it should be lengthwise on one surface and breadth wise on other surface. This will help in proper and uniform spreading of adhesive while pressing.
- Before allowing adhesive to dry, and bring both the surfaces in contact together, make proper alignment, and start pressing from one side by using wet squeezed cloth to avoid bubbles, and ensuring uniform contact.
- Fevicol Speedx starts to dry quickly. Position the substrates within 4 – 5 minutes.
- Repositioning should be done if required within a minute of joining.
- Pressure can be given by using nails; clamps; weight; masking tape etc.
- Excess adhesive; which oozes out from edges should be wiped off with wet squeezed cloth.
- To get best results, bonded surfaces are to be kept under pressure for 24 hrs.
- If required, pressure can be released after 4-6 hrs and the bonded assembly can be put to use.
- In case of highly porous surfaces like particleboard and MDF, it is advised that, a thin coat of FEVICOL SPEEDX is applied by pressure on the surface and allowed to dry. This will fill the pores of the surface. After drying, light sanding is to be done for getting smooth levelled surface and then this surface is bonded as per the method shown above.
ADVANTAGES-
- Solvent free, Non-hazardous, Non-flammable, No fire hazards.
- Free from offensive smell.
- If required; it can be diluted with clean water till applicability is achieved.
- Very quick setting time. Handling strength is achieved within 1 – 2 hrs of application.
- Superior flow and spreadability and hence it can give higher coverage.
- Excellent bond strength offering better moisture resistance.
- Can be applied by brush, roller, spreader, finger tip OR any suitable applicator.
- Easy clean up while wet.
- Excellent film formation.
- Dries clear.
Areas Of Application-
- Plywood to Laminate
- Plywood to Veneer
- Any Wood-to-Wood bonding
- MDF/Particle board/Block board to laminate.
Pidilite
At GHARABANAO.COM you can get your Interior related materials at Angul, Balangir, Balasore, Bargarh, Bhadrak, Boudh, Cuttack, Deogarh, Dhenkanal, Gajapati, Ganjam, Jagatsinghapur, Jajpur, Jharsuguda, Kalahandi, Kandhamal, Kendrapara, Keonjhar, Bhubaneswar, Koraput, Malkangiri, Mayurbhanj, Nabarangpur, Nayagarh, Nuapada, Puri, Rayagada, Rourkela, Sambalpur, Sonepur, Sundargarh. Best price Guaranteed.
